纳米涂层-用于纺织品和纸 nanocoating

这种基于纳米技术的创新的纤维保护产品，可以使几乎任何类型的纺织品具备防水，防尘，防污垢，防污渍的特性（中国进出口网）

用于纺织品和纸的nanoblo®纳米涂层不会影响外观，透气性，颜色并且易于维护。

另外，该产品户外防水性能好，液体变干的时间会更长。

如果您使用我们的产品，油渍，咖啡污渍和其他常见顽固污渍将成为历史。

我们的产品受到世界上最重要的纺织品行业的质量认证机构，德国海恩斯坦研究院的ECO-Passport认证，该认证确认我们的产品对于人体是完全安全的，接触涂层织物时完全不会伤及人的皮肤。

使用范例：
服装
家用纺织品（枕头，家具），地毯
麂皮/真皮
纸，纸板

产品特点：
强疏水性
强不粘性
保护纤维，防止灰尘渗入

其它性能：
透明液体（涂层厚度：100〜150 毫微米）
永久（防紫外线，非常耐磨损）
不会改变纤维触感
透气
操作简单（可自己动手）
耐洗涤剂和清洗剂

用法：
该产品操作简单，同样适用于终端消费者使用：
1.手动：润湿织物（通过喷洒或浸泡）
2.工业：使用标准的HVLP系统。

在距离物体表面10cm处喷洒。
此二氧化硅涂层喷洒后24小时固化。易清洁效果只能在硬化后进行测试。
可能已被留在表面上的涂层过程之前污渍将由涂层被截留在表面上。
施加该涂层前，一定要彻底清洁物体表面！

贮存：
未开封原装容器纳米涂层可以储存至少2年。
建议储物架和运输温度：3℃〜30℃

喷涂面积：
手动及工业： 25 - 100 ml/㎡，并且根据基质的吸收性而定。

和其他产品相比，nanoblo®二氧化硅涂层的竞争优势：
•持久性及其寿命：紫外线稳定性，确保其功效达数年之久，接近于涂覆表面寿命
而其他涂层会在阳光下慢慢损耗
•耐磨及易清洁效应：基质施加纳米涂层后，耐磨性能和耐机洗性能良好 - 该涂层会粘附到纤维上，直到它受外部影响被破坏掉。而许多和我们竞争的产品并不具备耐机洗性。
•耐清洗剂：该产品耐清洗剂。而许多和我们竞争的产品并不具备该特点，在清洁后必须重新施加

包装：
250毫升和500毫升，罐装，用于商业用途；5升和更大的罐装纳米涂层，用于工业用途。


This innovative fibre protection-product, based on Nano-Technology protects almost any type of textile from water, dirt, contamination and stains.

nanoblo® Textiles & Papers will not affect the appearance, its ability to breath, its colour and is easy to maintain.

Also, is exceedingly water-resistant on outdoor materials, keeping them drier longer.

Oil, coffee and other frequent stains belong to the past, if the material is treated with our protective products.

nanoblo® Textiles & Papers is certified with the ECO-Passport certificate from the Hohenstein institute from Germany, the world’s most important certificate when it comes to textiles that confirms that our product is completely safe for humans and nothing can happen to the human skin when it touches the coated textile.

Examples of use:
Clothing
Household textiles (pillows, furniture), carpets
Suede/leather
Paper, cardboard

Product characteristics:
Strong hydrophobics
Strong non-stick properties
Protection of fibres from the infiltration of dirt

Other properties:
Invisible to the human eye (coating thickness: 100-150 nm)
Permanent (UV-stable, very resistant to abrasion)
No change on haptic of the fibre
Breathable
Simple application (do-it-yourself)
Washing and cleaning agent resistance

Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Manual: Application by wetting textiles (spraying or dipping)
2. Industrial: Application using the standard HVLP systems.


Spray the surface from a 10 cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-clean effect can only be tested after this hardening period.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!

Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30°C

Consumption:
Manual & Industrial: between 25 and 100 ml/m2, depending on absorbency of the substrate.
An afforded quantity of approx. 10 ml/m2 per mm of material’s thickness should be calculated.

Advantages of nanoblo® SiO2 coatings in comparison with competitive products:
• Permanence and longevity: The UV-stability enables functionality for a number of years, approximately the lifetime of the coated surface
Many competitive products are damaged slowly by sunlight
•Abrasion-resistant easy-to-clean effect: A solid chemical connection with the substrate enables an excellent abrasion and washing machine-resistance – the coating adheres to the fibres until it is destroyed by external influences. Many competitive products are not washing machine resistant.
• Washing agent stability: The product is washing agent-resistant. Many competitive products must be reapplied after cleaning textiles

Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.